NETWORK CASE STUDY

NETWORK CASE STUDY - 3 6 COMPUTER ROUTER
yes ... yok spirit, we answer the question, how do we create a network with 3 routers and 6 now try to create a network computer with a design like this:
 Figure 1: CISCO Network Design
router only has two ports, so to connect with other networks, we must add a new module right, before trying to see this article:
 Figure 2: Design the network when connected to the port of each router and still have not added new module ...
Now we try to add the module and try to pair the cord more ...
Figure 3: Router has been added to the module and are connected to each network kemasing
if it is, now set each ip address to each computer and the router as shown below
 Figure 4: IP address for each part (for the router subnet mask is used 255 255 255 252 or point to point)
If everything is set up IP Addressnya, look at the picture below,,,

 Figure 5: All the lights will turn green
Next will be set Routenya IP, so that all computers can be connected ...Well, to be connected to PC02 PC01, then we have to do IP ROUTE, okay, now we try to ...
• Click 2x on Router 1• Go on a Router• Perform such order under this
 
Figure 6: IP ROUTE command to
if it is, then now try to ping from PC01 to PC02, PC01 then we will link to the PC03, which take into account is, or PC01 should recognize ROUTER ROUTER 1 2 and 3, then before we go straight to the PC03, we have an existing router IP ROUTE in front of him first, the command would have 2 IP ROUTEnya
entered on Router 1
 
Figure 7: IP ROUTE command later on ROUTER 2 interface fa 0/0
Now we try to ping from PC01 to PC03 ...Ohya, for more details command2 http://www.phc.web.id/2010/11/studi-kasus-ip-route.html readable IP ROUTE
to menghungkan PC01 to PC04, and so on, please can go,,, ... may be useful Yups ... amen ...